High-Speed Mineral Water Bottle Blow Molding Machine
ZQ-B600-8 Full-automatic PET stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has eight cavities and the maximum volume of the products is 600ml. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
ZQ-B600-8 machine adopts intermittent preform loading system.ZQ-B600-8 Video High Speed (Output MAX): 11000 Bottles/Hour, Container Volume: <=600ml.
Advantages 1. This machine is easy to operate by using full autoamtic human-machine interface. It runs smoothly at very high speed. 2. Every parts of whole machine is selected properly and treated precisely. 3. It adopts advanced intermittent preform loading syestem. 4. Conveying preforms automatically with conveyor. 5. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. 6. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus. 7. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure. 8. No contamination and low noise. 9. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. 10.Strong clamping force with high pressure and double crank links to lock the mold. 11.Two ways of operating: automatic and manual. 12.Safe,reliable,and unique design of the position of valve to make the air pressure diagram of the machine easier to understand. 13.Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process. 14.Contamination is avoided for the bottle body. 15.Ideal effect of the chilling with the chilling system. 16.Easy installation and starting;Low rejection rate: less than 0.2 percent.
By structure optimization and technicial innovation, Cost-effective ZQ-M series of blowing machines have been developed on the basis of ZQ-A series of blowing machines.
ZQ-M series of blowing machines can produce different shapes of 0.6L, 2.0L, 5L and 10L carbonated, mineral, pesticide, cosmetics, wide-mouth and other plastic PET/PP containers.They have all the advantages of ZQ-A series of blowing machines: Low rejection rate, high speed,stable running and easy operation.
Settings a).PLC colour display: OMRON(JAPAN) b).Pneumatic parts:AIRTAC(TAIWAN) c).Controller of preform transfer:Servo motor DELTA(TAIWAN) d).Other electric parts are all world-famous brand
Features A. Stable performance with advanced PLC. B. Conveying preforms automatically with conveyor. C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus. E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure. F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump. G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. H. Strong clamping force with high pressure and double crank links to lock the mold. I. Two ways of operating: automatic and manual. J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
High Speed PET Blow Moulding Systems - Linear Type
ZQ-B series full-automatic pet stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has one to two cavities and the maximum capacity of the products is 0.6L and 1.5L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization 2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it. 3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality. 4).High Speed:1400BPH(1-cavity) 2000BPH(2-cavity). 5).No Contamination:Closed production zone, good self-lubrication system avoid contamination. 6).Low Cost:Low consumption of electricity, air and water. 7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
Settings: a).PLC colour display: OMRON(JAPAN) b).Pneumatic parts:FESTO(GERMANY) c).Controller of preform transfer:Servo motor DELTA(TAIWAN) d).Other electric parts are all world-famous brand
Features: A. Stable performance with advanced PLC. B. Conveying preforms automatically with conveyor. C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus. E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure. F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump. G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. H. Strong clamping force with high pressure and double crank links to lock the mold. I. Two ways of operating: automatic and manual. J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand. K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process. L. Contamination is avoided for the bottle body. M. Ideal effect of the chilling with the chilling system. N. Easy installation and starting O. Low rejection rate: less than 0.2 percent.
ZQ-A series, newly developed by our company, is a two-step automatic blow-molding machine, which requires labor to put performs into the preheater only. ZQ-A series is of one cavity and the maximum cavity of the bottles is 0.6L,1.5L,5L. It can blow various bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET, PP etc. Compared with other full-automatic series, ZQ-A series has no automatic conveyer, so it can’t transfer performs automatically, but requires labors to put performs into preheater. The distinctive feature of the ZQ-A is as follows: it has saved the cost to the maximum extent; it has lower rejection rate, higher production, and more stable performance than the semi-automatic one, and moreover, it is easy to run. Therefore, it will take the place of the semi-automatic blow-molding machine.
Settings: a).PLC colour display: OMRON(JAPAN) b).Pneumatic parts:FESTO(GERMANY) c).Controller of preform transfer:Servo motor DELTA(TAIWAN) d).Other electric parts are all world-famous brand
Features: A. Stable performance with advanced PLC. B. Conveying preforms automatically with conveyor. C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus. E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure. F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump. G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. H. Strong clamping force with high pressure and double crank links to lock the mold. I. Two ways of operating: automatic and manual. J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand. K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process. L. Contamination is avoided for the bottle body. M. Ideal effect of the chilling with the chilling system. N. Easy installation and starting O. Low rejection rate: less than 0.2 percent.
High-speed PET Stretch Blow Moulding Machine-Servo and energy conservation
ZQ-B1500-8 Fully automatic PET stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has eight cavities and the maximum volume of the products is 2.0L.This model is especially applied in the bottle production of PET water,hot-filling juice/tea,carbonated drinks,edible oil,cosmetics,pesticide bottle,and other packing containers,which is made of plastic of crystalline type, such as PET and PP etc.
This machine adopts rotary perform loading system,which is very stable and reliable and applicable of different size of preform. High Speed (Output MAX): 9000 Bottles/Hour, Container Volume: <=2000ml.
The advanced hydraulic mould clamping system helps the machine runs stablely with little vibration and applicable to different bottle sizes.
The servo conveying system with high accuracy of position,quick speed and good stability.
The precise design of heating tubes height and PET preforms spacing, to make it work the best.
The top class air supply control system assures even air flow and quick response of the machine ,which improves the quality and uniformity of the products.
Advantages 1． This machine is easy to operate by using full autoamtic human-machine interface. It runs smoothly at very high speed. 2． Every parts of whole machine is selected properly and treated precisely. 3． We adopt rotary preform-loading system, which overcomes the shortage of the traditional intermittent preform loading. This new system can load preforms faster, more efficient, more continuously and smoothly. 4． To let preform heated fast, preforms are closely arranged in heating zone. We can not only get even heated preforms but also save much power. 5． TSUBAKI chain(Japanese brand) with precise pitch distance and greater durability is adopted in heating zone. 6． The chain is with flexible tensioning structure of mold spring, which extends chain life. 7． There is cooling device at bottle neck to keep its original shape. 8． Distance distributing structure is designed properly. Distances are divided accurately and credibly after preform holders coming out of heating zone. 9． Festo Servo motor and electrical positioning syestem(Germany brand) are applied in preform(bottle)conveyor,it ensures faster preform(bottle) conveying and higher precison of re-positioning,overcoming defects of traditional pneumatic conveyong structure. 10． It is hydrualic mold clamping structure, which makes sure of the strong clamping force and smooth running. 11． We use servo motor to stretch preforms, which helps to get very fast stretching speed and very accutate stretching stroke. What’s more, stretching stroke can be adjusted at will. 12． Festo combination valves(Germany brand) are applied in air blowing(exhausting) system to make it faster and more durable. 13． With novel design of conveyor, bottles can be smoothly delivered from blowing machine to filling machine directly. 14． There is zooming system for every running structure, which protects the whole machine.
